Smartpack 2 Touch

Smartpack 2 Touch
Smartpack 2 Touch
Smartpack 2 Touch
Smartpack 2 Touch

Advantages

  • Touch screen
  • Monitoring and control via an adaptive web interface
  • More data
  • Possibility of integration with third-party control systems and control devices
  • Programmable multi-purpose inputs
Smartpack 2 Touch is the next generation controller, with large amounts of data, with more intelligent networks and infrastructure, with a large number of Internet objects.
Description
Characteristics
Smartpack2 is very different from its predecessors. Smartpack2 Touch will not only record and analyze a much larger amount of live data, perform more accurate and detailed analysis, but also display results in a variety of user-friendly ways.

Smartpack2 Touch provides the ability to control not only Eltek equipment, but also other manufacturers connected through numerous digital interfaces, including dual CAN bus, USB, serial ports and Ethernet connections. It will control the entire infrastructure of the power facility, giving the operator the ability to manage equipment such as smart batteries, electricity meters and cooling systems.

The controller is based on the Linux operating system - an open source system, and has a high- performance processor in the core. Combined with the software, this makes it very reliable and feature rich. The ability to work with both existing equipment and new equipment that will soon be available, whether it's Eltek products, Delta products or any other standard equipment, makes Smartpack2 Touch a reliable solution.


Input
Voltage DC (operating range)
420 VAC
Electrical
Power consumption
4.5W
MTBF
1300000 h
System connections
Voltage
1 or 3
Current
1 or 2
Battery2
Load
Ground fault detection
Output
Output
Form-C Dry Contact (NO-C-NC) Max 75V
Configurable inputs
6
Number of configurable inputs
6
Digital configurations
#1-6: Open/Closed
Number of analog configurations
3
Analog configurations
Temperature: NTC probe Analog:+/-0-10V 4-20mA current sensing
LVD
Loads
2
Ports
Available ports
CAN;Ethernet;I2C;RS-282;RS-485;USB
Display
Size
4,4"
Resolution
480 x RGB x 2722
Battery Distribution
LVBD
Yes
DC Load Distribution
LVLD
Yes
Other
Operating temperature
-20- 65 °C
Storing temperature
-40 - 85 °C
Insulation
Yes
Dimensions WxHxD (mm)
174 x 78 x 41 mm
IP22
Software functionality
Remote MonitoringDHCP DHCPv6 SNMP v1, v2c and v3 MODBUS TCP/RTU Slave Modem Call-back & SMS Alarm for GSM modems pComm (Windows Config/Monitoring Tool) via Modem & IP IPv4 IPv6 (static-link) IPv6 (stateless autoconfig) IPv6 (statefull autoconfig) - DHCPv6 SNTP - clock syncronizing SMTP/email custom reports as .csv attached SMTP Secure RADIUS (single-sign on) FTP - file transfeer (SW updates, log's download, etc) FTPS - FTP secure UDP pComm for PowerSuite (Windows Config/Monitoring Tool) HTTP (Webpages with all functions/features/monitoring - responsive design for PC screen, tablet screen, smartphone screen) HTTPS (TLS enqrypted web interface)
Rectiverter Functions/MonitoringAdjustable output frequency Adjustable output AC voltage Adjustable frequency hold-in range/hysteresis for inverter mode Adjustable DC Current Limit Inventory overview Auto adressing/plug-and play Manuel adesssing override Dynamic output OVS Rectiverter AC Output Voltage Phase 1, 2 & 3 Monitoring (4-level Alarm) Rectiverter AC Output Frequency Monitoring (4-level Alarm) Rectiverter AC Output Current Phase 1, 2 & 3 Monitoring (2-level Alarm) Rectiverter DC Output Current Total Monitoring (2-level Alarm) Rectiverter Error Monitoring (2-level Alarm) Rectiverter AC Current Share Error Phase1, 2 & 3 Monitoring (2-level Alarm) Rectiverter AC Capacity Monitoring (2-level Alarm) Rectiverter DC Capacity Monitoring (2-level Alarm) Rectiverter Temperature (4-level Alarm) Rectiverter Communication Error Monitoring (2-level Alarm)
Solar Charger Functions/MonitoringCharger module built in MPPT Voltage Input Value Solar Charger Current Monitoring (2-level Alarm) Solar Charger Error Monitoring (2-level Alarm) Solar Charger Communication Error Monitoring (2-level Alarm) Solar Charger Panel Unbalance Monitorting (2-level Alarm)
Wind Charger Functions/MonitoringConfigurable Power-Voltage Characteristics Curve in charger module Wind Charger Current Monitoring (2-level Alarm) Wind Charger Error Monitoring (2-level Alarm) Wind Charger Communication Error Monitoring (2-level Alarm)
Battery Management/MonitoringTemperature Compensation Symmetry - Midpoint measurement 12V, 24V, 30V, 36V, 54V, 108, 110V, 168V Symmetry - Double midpoint measurement Symmetry - Block measurement 6V, 12V, 24V Symmetry - Cell measurement 2V, 6V Auto Boost Charge Interval Boost Charge Follow-up Boost Charge Equalize Charge, manual & inerval Temperature Compensation during Boost & Equalize Charge Battery Discharge Health (SoH) testing - normal, based on discharge batt. Spec. Battery Discharge Health (SoH) testing - simple, based on backup time requirement Battery Discharge Health (SoH) testing - manual, interval, or alternate scheme Battery Test logging Battery DoD Cycle logging Battery Cycle counter logging Battery Run time logging Battery LifeTime Prediction based on temp ranges Battery Discontinuance Testing -simple or advanced (based on shunt in each string) Analog Battery Float charge regulation based on input voltage signal Battery Voltage Monitoring (4-level alarm) Battery Current Monitoring (4-level alarm) Highest of multiple battery temperature Monitoring (4-level alarm) Individual Battery Temperatures (4-level alarm) Battery SoC Monitoring (2-level Alarm), % or Ah Accumulated Ah Charged/Discharged Monitoring (2-level alarm) Failed Battery Test Monitoring (1-level alarm) Individual Battery Fuse Monitoring (1-level alarm) Individual Battery String Current Monitoring (2-level alarm) FIAMM SONICK Battery BMS communication SAFT Evolion Battery BMS communication Narada Battery BMS communication Leoch Battery BMS communication Sacred Sun Battery BMS Battery BMS communication Northstar ACE Battery(Gateway) communication Eltek Generic Battery communiction protocol LVBD (voltage, temperature, mains controllable)
Mains/Grid MonitoringPhase Failure Monitoring (2-level Alarm) Phase Voltage Monitoring (4-level Alarm) Frequency Monitoring (2-level Alarm)* Active/Reactive/Apperent Power Moitoring 3 phases (2-level Alarms)* Power Factor Monitoring 3 phases (2-level Alarm)* Mains Current Monitoring 3 phases (2-level Alarms)* *Require AC Mains Monitor CAN Node
Load Management/MonitoringLVLD Coldstart LVLD Load Fuse Monitoring (1-level alarm) Load Current Monitoring (2- level alarm) Individual Load Fuse Monitoring (1-level alarm) Individual Load Current Monitoring (2- level alarm) Individual Load Power Monitoring Individual Load Energy logging Individual Load Energy cost logging
Programmable LogicOR function of multiple alarms/events AND function of multiple alarms/events Inversion of logical signals Task Scheduler (hourly, daily, weekly, monthly) of any commands/events Alarm Grouping
Hybrid Functionality/MonitoringSoC Controlled Gen Set start/stop Voltage Conrolled Gen Set start/stop Daily Schedule Controlled Gen Set start/stop Soruce Limitation for Gen Set Testing Priorty Solar Charger Priority Wind Charger Fuel Tank level Monitoring (2-level Alarm)
Available LogsEnergy Logging (mains, rectifier, rectiverter, grid inverter, solar charger, wind, battery, load) - hourly, dailiy, weekly Data Logging (10 parameters, various trigger intervals and event triggers) BHL/HAA-loggs Account login log Change log Inventory Export
Climate Control & MonitoringFan control, linear speed vs. temp / max speed* Fan Speed Deviation Monitoring* Humidity Reduction* Intervall Preasure Test* *Require I/O Montior T3
Various ControllersSecurity setup (open/close UDP/TCP ports) User Account Setup Programmable Buzzer Remote Software Upgrade - maincontroller over IP Remote Software Upgrade - CAN Nodes through maincontroler via FTP Controller/Power Module LED Test Programmable LED Panel (16 LED / 4 color + 4 Push Button) Programmable Viritual Inputs XML Configurations - full parameter flexibility XML Configurations - mass distribution, Web GUI Upload, Windows Upload, SD Card/FTP Upload