Floor-standing outdoor cabinet OUTDOOR ALUME KS
Advantages
- Aluminium frame
- External temperature range T° -45°C to +50°C
- Protection degree IP54
- Maximum bearing capacity 600 kg
- Heating system
- Air conditioning system
Width: 950 mm
Depth: 1050 mm
Weight: 336 kg/ 372 kg
Type of door: Sandwich panel
Design: Dismountable
Framework: Durable aluminum profile, sheet metal with zinc coating (inner part), sheet metal with powder coating (outer part)
Temperature: from -45°C to 55°C
Thermal insulation: Rock wool, 50 mm thick, non-flammable class
Cooling system: Air conditioner - cooling capacity 1500 W or 2500 W, 220 VAC
Heating system: 2 fan heaters - capacity 800 W, 230 VAC or 48 VDC
Type of lock: five-latch, three-point
Finish: Polymeric powder
Color: RAL 7035 (light grey)Protection degree: IP54
Maximum permissible distributed static load: 600 kg
The floor-standing outdoor cabinet Outdoor Alume KS has a frame that is made of aluminum and metal (steel) galvanized doors and walls, as well as its entire frame is covered with anti-corrosive powder paint. This model is equipped with shelves for the installation of batteries and has a hatch for DGU. The side walls and doors are designed as a sandwich panel, and the inside uses a non-combustible insulation non-flammable class. The cabinet has a partially modular design, ensuring the fastening of removable panels from the inside only. Temperature range is from -45°C to +50°C. The protection class of the cabinet is IP 54. The maximum weight of the equipment with which the structure can be loaded is 600 kg.
- The reliable framework consists of an aluminum advanced profile.
- Separate climate control ensures optimal climate for devices and batteries.
- The cabinet is installed on a 100 mm high base; there are mounting holes in the base to fasten the cabinet to the concrete base.
- The structural elements of the cabinet are made of high-strength sheet steel, and the vandal-proof design of the doors prevents easy access to locks and hinges, and as a result, equipment theft.
- Effective cooling and heating solutions: air conditioning with “free cooling” and heating function, high-performance fan heaters for heating.
- The climate control system is controlled by the built-in air conditioner controller as well as by the thermostat (for heating function).
If necessary, this model of the cabinet can be equipped with a remote monitoring system (optional).
- Complete cabinet (two doors, roof, base) - 1 pc.
- Fluorescent lamp TL2001 8W - 1 pc.
- Anchor PROLONG 10x80 - 4 pcs.
- Plug 525 stationary 3Р+РЕ+N 32А 380В IP44 - 1 pc.
- Air conditioner Kn-1500, 1500 W, 220V KS - 1 pc.
- Eye bolt - 4 pcs.
- Seal Skintop M25x15 - 2 pcs.
- Seal Skintop M32x15 - 2 pcs.
- Seal Skintop M50x15 - 6 pcs.
- Fan heater 400 W 220 V - 2 pcs.
- Automatic circuit breaker 1Р 10А, 6 kA, C, Hager - 2 pcs.
- Automatic circuit breaker 1Р 16А, 6 kA, C, Hager - 1 pc.
- Automatic circuit breaker 1Р 20А, 6 kA, C, Hager - 3 pcs.
- Automatic circuit breaker 1Р 32А, 6 kA, C, Hager - 2 pcs.
- I-0-II 3-pole 40А/400В Hager switch - 1 pc.
- Din-rail socket with grounding - 1 pc.
- Ground bus bar - 1 pc.
- ETP 48400-B6 power supply unit - 1 pc.
- R4850Gs Rectifier module - 2 pcs.
- SMU02B control unit - 1 pc.
- TE820E10B battery temperature sensor - 1 pc.
- Battery connection wire 35 mm2 L=2.4m black - 2 pcs.
- Battery connection wire 35 mm2 L=2.4m blue - 2 pcs.
- Balanced cable VBAT-DLK01/02 - 1 pc.
- Balanced cable VBAT-DLK03 - 1 pc.
- Complete power supply unit: - 1 pc.
- Automatic circuit breaker 1Р 6А, 6 kA, C, Hager - 2 pcs.
- Automatic circuit breaker 1Р 10А, 6 kA, C, Hager - 1 pc.
- Automatic circuit breaker 1Р 16А, 6 kA, C, Hager - 4 pcs.
- Automatic circuit breaker 1Р 25А, 6 kA, C, Hager - 9 pcs.
- SMK-7P reed relay - 2 pcs.
- Template for installing the cabinet on a concrete base - 1 pc.
